Zoeller 57-0001 M57 Review

Sump pumps will automatically work well if you as the homeowner is alert of the origin cause and fears for excess water or flooding. You should understand that even in sunny days, the basement floor and walls may perhaps be holding back several gallons of water, and therefore the power and volume of water locked in the ground should never be taken too lightly. Hydrostatic forces are cable of pushing building foundations aside and destroying concrete dams. And that’s why it is generally important to recognize that the water pooled below the ground is not static, instead it is under some dynamic upward stress from the rocks surrounding it and the cumulative mass of soil.

And since no one likes to take care of the troublesomeness of time wasting cleaning caused by flooding, sump pump systems are developed to remove the water accumulated in the sump pit or hole before getting to the crawl space or basement floor level. And speaking of sump pump systems, this article is going to give you a detailed review of the Zoeller 57-0001 M57 sump pump system, one of the best in this era.

About the Zoeller 57-0001 M57 Sump Pump System.

Banked on the fact that it is regarded as a de watering and effluent pump, the Zoeller 57-0001 M57 Sump Pump System is a submersible dust tight and water tight unit fortified with some of the greatest feature necessary to have a good sump pump for light commercial and residential de watering uses. The most noticeable features are the non-clogging vortex impeller, the durable cast iron pumps that has a powder coat epoxy finishing to offer great heat dissipation from the motor and designed to overcome corrosion, hence ensuring a lengthy service life. This pump is fully certified through pressure tests that ensure it can be submerged and work well to ensure excellence and reliability for year nad decades of uncomplicated performance.

Applications.

  • Groundwater and septic tank systems (effluent) transfer.
  • Light commercial and residential de watering.

Key features.

  • Corrosion resilient powder coated epoxy finish.
  • Non-clogging vortex impeller.
  • Solid flexible polypropylene float.
  • Stainless steel handle, screws, guard and switch arm.
  • Always oiled bearing.
  • Dust-tight and water tight.
  • Has a 54 degree Celsius maximum temperature for de watering and effluent.
  • Ceramic and carbo shaft seal.
  • It is fortified with a 1/3 HP motor.
  • Between the pump housing and motor there is an impermeable neoprene square ring.
  • It has 1-1/2’ NPT discharge and passes ½’ round solids.

Why you should invest in the Zoeller 57-0001 M57 Sump Pump System.

One thing that you should understand is that you can never go wrong with the Zoeller 57-0001 M57 Sump Pump System because of its 1/3 horsepower motor system that is very much powerful to help in getting rid of accumulated water in the shortest time possible. It is also has some thermal overload protection system, ensuring that it can never overheat. Not forgetting the warranty that come with it.